ELSi Red Lamp LED Pack (2 x HXLED12 & ELSi Unit)

Description

The E.L.S.i Red Lamp LED Pack combines the E.L.S.i automatic backup shut off switch and 2 off the HXLED12 as a complete kit for adding alternating red lamps to your vehicle. The E.L.S.i has been developed in conjunction with the Recovery Industry Support Charity (RISC) to provide the automatic shutdown of Emergency rear-facing red flashing lamps to ensure that they are not illuminated while the vehicle is moving as required by the new government regulations controlling the use of Emergency rear-facing red flashing lamps by the vehicle recovery industry. This automated control is provided by a dedicated microcontroller which is monitoring vehicle movement using a Global Navigation Satellite System (GNSS) and an Inertial Measuring Unit (IMU) which is utilised if GNSS signal is not available. This microprocessor control will disable the rear-facing red flashing lamps output when the vehicle speed exceeds a preset level. The LAP HXLED range, specifically designed for heavy duty applications, is manufactured in an aluminium die-cast housing and tough polycarbonate lens. IP67 and IP69K ingress protected.

Features

• ELSi:
• The rear-facing red flashing lamps cannot be illuminated if the amber lamps are not active.
• When leaving an incident, the rear-facing red flashing lamps will be turned off automatically when the vehicle exceeds 5mph.
• The rear-facing red flashing lamps can be turned on before the brakes are applied.
• To allow time for vehicle manoeuvring at the scene, ELSi starts monitoring vehicle movement 10 seconds after the rear-facing red flashing lamps are switched on.
• HXLED:
• ECE R65 approved
• EMC (ECE R10) approved
• Meets CISPR25 class 3
• Multi-voltage (10-30V)
• IP67 and IP69K ingress protection
• Manufactured with 1W amber LEDs
• Dimensions: 117 (W) x 125 (L) x 17mm (D)
• Aluminium die-cast housing
• Link multiple units for synchronised & alternating flash
• Supplied with foam gasket & fixing screws
• 2 year warranty